ElectroVoice X-Array Xi-1082 Install Speaker Optional wall mount / under balcony bracket.Two-Way, Full-Range, Sound-Reinforcement SystemIntroducing a family of advanced sound reinforcement products for everyone who desires the sound quality of Electro-Voice’s X-Array™ touring systems. X-Array Install™ is the ideal choice for small-to-medium array configurations and fixed installations of any size. Inspired by the most demanded features of EV’s acclaimed X-Array™ touring systems, The X-Array Install™ series incorporates a potent combination of very high output, medium- to long-throw “cells,” and Ring-Mode Decoupling (RMD™). RMD™ Ring-Mode Decoupling is the same advanced technology built into the X-Array™ touring series. RMD™ produces substantially improved tonal character and fidelity whether operated at low or extremely high sound pressure levels. RMD™ attacks time domain “ringing modes” at their sources. Mechanical solutions resolve mechanical issues, acoustical solutions address acoustical modes found in all sound reinforcement systems. The combination of each RMD™ technique provides improved tonal character and fidelity at increasing drive levels. The result is clear, even sound quality with vastly improved intelligibility. Magnetics Mid-bass and high-frequency drivers in X-Array Install™ products use ferrite magnetics instead of the neodymium magnetics used in X-Array™ touring systems. While neodymium drivers provide unmatched output capabilities, the advanced RMD™ technology used in X-Array Install™ produces world class sound reinforcement at very high levels.Features : 8-inch two-way90° x 40° horn coverage175-watts long term power capacityRing-Mode Decoupling (RMD™)Full-range with internal passive crossoverDH3 1-inch-exit compression driver with titanium diaphragmLow-profile for low ceiling or under balconiesSpecifications : Axial Frequency Response (swept sine wave, 4 volts at 10 feet on axis, anechoic environment normalized for 1 watt/1 meter)50-20,000 HzLong-Term Average Power-Handling Capacity (per ANSI/EIA RS-426-A1980)175 wattsSensitivity (SPL at 1 m, 1 W into nominal impedance, anechoic environment, band-limited pink-noisesignal, 100-15,000 Hz)90 dBBeamwidth (angle included by 6-dB-down points on polar responses, horizontal and vertical planes, indicated one-third-octave bands of pink noise)3150-16000 Hz Horizontal : 90° 10°/–16° Vertical : 40° 18°/–0°Directivity Factor, R (Q), 2,000- to 20,000-Hz Median13.2 ( 6.5, –6.1)Directivity Index, D 2000-20000Hz, Median11.2 dB ( 1.8 dB, –2.7 dB)Transducer Complement Low-Frequency : High-Frequency :8-inch woofer DH3 Compression driver on HP94 HornBox Tuning Frequency55 HzCrossover Frequency3500 HzCrossover Slope12 dBImpedance Nominal : Minimum :8 ohms 5.8 ohmsEnclosure MaterialsPlywood with removable grilleGrilleBlack powder-coated steel backed with foamDimensions :Height :WidthFront :Rear :Depth : 488 mm (19.23 in.)235 mm (9.25 in.)150 mm (5.9 in.)285 mm (11.23 in.)Net Weight13.3 kg (28 lb)
