ASL BS-210 Based Intercom Package2 sets available :Set 1 (working, well loved) : 1x ASL BS-210 Base Station8x BS-15 Beltpack4x MB K800 Headset (all need new padding)2x IS 140 Light/Sound Beacon (1 white, 1 green)FlightcaseSet 2 (parts set) :1x ASL BS-210 Base Station – open side and loose psu, working4x BS-15 Beltpack (3x broken clip – working, 1x defective)2x IS 140 Light/Sound Beacon (Selector switches not working properly)1x MB K800 Headset (needs new padding)FlightcaseThe BS 210 (19”/1RU) is designed to be a master station in an ASL intercom system. To connect the unit to its remote intercom stations, use professional microphone cable (2 conductors and 1 shield) only. Each channel has a Volume (listen level) control, a TALK and a CALL button with LED indicators. With a headset connected to the XLR-4 headset connector one can talk and listen to each channel separately or to both channels simultaneously. With side tone trimmers one may adjust the listen level of one’s voice in one’s headset. The built -in power supply is fully protected against short circuit or excessive thermal condition and can safely drive up to 15 Basic Series beltpacks operating at full power. An Aux input connector at the rear panel allows injecting external audio signals of line or mic level into the intercom lines. When ‘mic level’ is selected, 30V phantom power is available at the Aux input connector. The unique ASL Call system provides both a flashing red LED and a very distinctive sound signal. A slight touch of the CALL button makes the call LED flash, whilst holding the button for 2 seconds the call sound signal is activated.
