Barco NX6 LED Tile (6mm)

Barco NX6 LED Tile (6mm)Hanging and stack bars on requestThe NX LED tiles offer the deepest black levels available on the market, and pair this with a phenomenal contrast ratio of more than 4,000:1. With a light output of over 2,000 nits and native 16-bit color processing, it will surely display perfect image quality in any indoor setting. In addition, the NX series guarantee easy and quick installation and are lightweight by design.True black LEDWith the NX series, Barco has developed a true black LED – and not just a black package. With its black shaders and black silicon resin, each LED displays the deepest blacks and brightest luminance levels available. NX-6 has a phenomenal contrast ratio of 4200:1 and a calibrated light output of 2000 nits.LightweightTo complement the NX LED display, a carbon fiber structure has been designed in a framework rather than in a box. The result is a support system far stronger, far lighter, and ten times less sensitive to deformation than the current “metal” structures.SeamlessThe LED modules of the NX connect directly to the structure via high-strength “neo” magnets, rather than traditional screws. No tools are required for mounting or removal. With each magnet capable of holding over 1000 times its own mass, the result is precise positioning, easy setup, and a completely seamless displayGet creative!The NX tiles can either be used as a standard integrated display, or as a separate display for creative designs. And when used in conjunction with Barco’s Director Toolset, you can build displays of any shape or form.Consistent uniformity over time – Barco’s LED “anti-aging” solutionBy running the LEDs at lower temperatures, extremely high brightness levels are achieved at much lower currents. Within the LED itself, the use of silicon instead of epoxy resin also slows down the aging process, and provides a greater degree of reliability in humid operating conditions. The NX’s “tri-color” LED calibration further ensures display stability and uniformity over time.Brilliant colors, breathtaking grayscalesEach NX LED can deliver up to 281 trillion colors, enabling tiles to reach higher levels of color depth, uniformity, and grayscale. Thanks to its 16-bit processing power, NX tiles can be calibrated to a larger color triangle – one that is wider than the HDTV standard – delivering cross rentable tiles with deep, uniform colors across the entire display surface.Remove the tools, improve the serviceabilityNo tools or cables are required to set up and secure an NX LED wall, or take it apart for service. And because the Mag-frame is essentially an open structure, there is easy access to every module, the control unit and interface boards.SpecificationsPixel pitch6.22 mmBrightness2,000 nitsLED configuration3-in-1 SMDPixel density25,829/sqm 2,402/sqf 5,832/tile (72×81)Hor. viewing angle120°Vert. viewing angle 60°, -60° (@ 50% brightness)Contrast ratio4,200:1 (at 500 lux)Lifetime60,000 hours to 75% of initial brightnessPower consumption219 W/tile (max) 104 W averageOperation power voltage200-240V / 50-60HzTile dimensionsWidth: 448mm (17.6″) Height: 504mm (19.8″) Depth: 210mm (8.27″)Weight / Tile12.9 kgIP ratingIndoor use onlyProcessing16 bit/colorColors281 trillionRefresh rate3,200HzFoot build-upMax. 12 tiles highTruss build-upMax. 15 tiles highLink interfaceNNI interface (HDMI connector)Max link length10m (with Barco HDMI cable)Interfaces4x HDMI link 1x USB (diagnostic)Max power cascade connection8 tilesServiceabilityFront and back (tools required for front)Operating temperature0-40°CStorage temperature-20 – 60°COperational humidity35-85%Storage humidity10-90%Source compatibilityCVBS, YC, YUV, RGB, DVI (Single and Dual link , up to 2048×1536) SDI. HD-SDI, Dual link HD-SDIOperatable digitizerDX-700 (with NNI output card)CertificationsCE class A, TUV, FCC Class A, ETL, Cebec