Features Studio quality Mic Preamp/Channel Strip Processor Classic dbx Compression puts great sound within easy reach Frequency tunable De-Esser reduces sibilance and high frequency distortion Enhancer increases the detail and definition of the high and low frequencies Program adaptive Expander/Gate Insert jack allows you to add an external processor Full compliment of meters and status LEDs 48V Phantom Power Precision detented controls Specifications Mic Preamp Connector: XLR Floating balanced, Pin 2 Hot Mic Preamp Input Impedance: ~4.2kΩ Mic Preamp gain: 0dB to 60dB Mic Preamp Phantom Power: 48VDC, applied to XLR pins 2 and 3 through 6.81kΩ resistors CMRR: >40dB, typically 55dB Mic Preamp max input level: 0.2Vrms, Gain = 30dB Mic Preamp Equivalent Input Noise (EIN): -125dBu, 22Hz-22kHz, 150Ω source impedance Input Connectors: (line) Floating balanced, TIP Hot Input Impedance: (line) 10kΩ unbalanced, 20kΩ balanced Max Input: (line) > 21dBu, balanced or unbalanced Input Gain Range: (line) -15dB to 45 dB Insert Connector: 1/4" TRS: Normalled; tip is Send, ring is Return Insert Impedance: >5kΩ (ring-return); 100Ω (tip-send) Insert Max Level: > 21dBu; > 20dBm (600Ω load-tip) Insert Noise: <-84dBu, unweighted (20Hz-20kHz); LINE GAIN Control set to 0dB Insert Distortion: <0.01% THD, 20Hz-20kHz, 10dBu Output Connectors: 1/4" Balanced/Unbalanced TRS Connectors Output Impedance: 100Ω unbalanced, 200Ω balanced Max Output: > 21dBu, > 20dBm (600Ω load) Gain Adjustment Range: -30dB to 10dB Noise: <-80dBu unweighted (20Hz-20kHz); Both Gain Controls set for 0dB, all processing controls OFF Frequency Response: 20Hz to 20kHz, 0.5, -0.5dB THD: <0.08%THD, 20Hz-20kHz, 10dBu, all Processing Controls OFF Compressor Threshold Range: -40dBu to 20dBu Compressor Threshold Characteristic: OverEasy Compressor Ratio: >4:1 For input levels beyond 20dB above threshold Max Compression: 30dB Compressor Attack Time: Program-Dependent; >1s for small level increases, down to 10ms for larage increases Compressor Release Time: Program-Dependent; adjustable between approximately 1dB/sec and 75dB/sec Compressor Distortion: Typically <0.05%THD, 20Hz-20kHz, 15dB G/R, 10dBu Output, DENSITY @ 0 IMD: SMPTE: <0.05%; 60Hz/7kHz 4:1, 15dB G/R, 10dBu Output Level, DENSITY @ 0 De-esser Characteristic: Wideband Gain Reduction De-esser Frequency Range: 800Hz to 10kHz High Pass, 12dB/octave De-esser Release Time: 12dB/octave Program-Dependent; approximately 1mS/dB Enhancer HF Detail Characteristic: Program-controlled shelving equalizer, approximately 15dB maximum HF boost Enhancer LF Detail Characteristic: Bell-shaped boost @ 80Hz, bell-shaped cut @250Hz, ratio is approximately 2:1 Expander/Gate Threshold Range: OFF to 15dBu Expander/Gate Ratio: Adjustable 1.5:1 to 10:1 Expander/Gate Max Depth: >50dB Expander/Gate Attack Time: Program-Dependent, approximately 2mS (at maximum attenuation) Expander/Gate Release Time: Program-Dependent, approxiamtely 10mS/dB Expander/Gate Dynamic Range: Typically 105dB Power Consumption: 15W Operating Voltage: DO: 120VAC 60Hz, 100VAC 50/60Hz; EU: 230VAC 50/60Hz Operating Temperature: 0°C to 45°C (32°F to 113°F) Dimensions: 1.75" x 5.75" x 19" (4.5cm x 14.6cm x 48.5cm) Unit Weight: 4.5 lbs/2.04 Kgs
