JBL VMA1120 Commercial Series 120W Bluetooth-Enabled Mixer-Amplifier

Features Suitable for commercial and industrial use Euroblock, RCA, and 1/4" TRS input connectors Independent bass and treble controls for each output channel Voice-activated ducking during announcements Remote volume control capability using optional JBL CSR-V module and Cat5e cable with RJ45 connectors Priority muting using PTT switch closure Configurable output routing Barrier block output connections to drive 8 Ohms, 70V or 100V speaker systems Media player capable of playing MP3 files from a Bluetooth device or USB drive Specifications Output Power: 120 W (per channel into 4 Ohms or 8 Ohms, 1 kHz, ≤0.5% THD) Insertion Loss: 70 V and 100 V Outputs: 1 dB maximum Input Channels: 5 Output Channels: 1 Tone Controls: Bass and Treble non-detented potentiometers on each channel Bass: ±14 dB @ 50 Hz Treble: ±14 dB @ 10 kHz Input Sensitivity: To obtain full rated power (load of 8 Ohms) Mic Input: 5.5 mVrms Line Input: 1.3 Vrms RCA Input (Stereo In): 130 mVrms Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output 4/8 Ohms Output: 20 Hz to 20 kHz, ±2 dB 70 V/100 V Outputs: 80 Hz to 15 kHz ±3 dB Total Harmonic Distortion (THD): Measured at 2.83 Vrms into rated load impedance at any output Power Amp Output: <0.5%, 20 Hz to 20 kHz Signal-to-Noise Ratio: >76 dB (reference rated power, mixer levels @ minimum, master volume @ maximum A-weighted) Input Impedance: Nominal Mic: 400 Ohms Line: 20 kOhms (balanced) RCA: 50 kOhms Phantom Power: 27 VDC Crosstalk: -70 dB (reference rated power, volume at mid position, 1 kHz) Nominal Input Voltages: Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz Minimum Load Impedance: Low Impedance Output: 4 Ohms 70 V Output: 40 Ohms 100 V Output: 80 Ohms Operating Temperature: 32 to 95°F / 0 to 35°C Humidity: 95% RH (non-condensing) Storage Temperature: -4 to 185°F / -20 to 85°C Dimensions (W x D x H): 17 x 16.3 x 3.5" / 432 x 415 x 88 mm Weight: 20.2 lb / 9.2 kg